Filter
Top Products
GS748T Smart Switch Hardware Installation Guide
Installation 4-3
v1.0, January 2007
4. Support the weight of the switch and use four pan-head screws with nylon washers to attach it
to the rack; use a #2 Phillips screwdriver to tighten the screws.
Figure 4-1 Mounting the Switch in a Rack
Step 3: Checking the Installation
Before you apply power, inspect the equipment thoroughly to:
• Verify that all cables are installed correctly.
• Check that cables are not damaged and that cable routing does not interfere with equipment to
create a safety hazard.
• Ensure that all equipment is mounted properly and securely.
Step 4: Connecting Devices to the Switch
The following procedure describes how to connect devices to the switch’s RJ-45 ports. Your
NETGEAR GS748T Gigabit Smart Switch contains Auto Uplink technology, which enables you
to attach devices using either straight-through or crossover cables.