Filter
Top Products
Page 18 of 24
Sysinfo page. To use your web browser, simply type the IP address in the URL address bar and hit enter.
If you want to use an SNMP management application, you will need to note the IP address and to configure
the SNMP settings in your switch so that it will respond to SNMP requests. This configuration can be done
through either the console or web browser GUI. See User Guide on how to enable SNMP access.
Note: The switch IP address is by default using DHCP mode to assign its address. If you leave the switch
IP mode in the default DHCP mode, the IP address of your switch could change, and you would have to
reconnect to the switch via the console port to discover the new IP address. Change the IP mode to
Manual for a more reliable connection. If you need help changing the IP mode, please refer the User
Manual on the Resource CD for Layer 3 Managed Switches.
To learn more about the managed features on your switch, refer to the manual on the Resource CD.