NETGEAR POE101 Network Card User Manual


 
Introduction
NETGEAR POE101 Power over Ethernet adapters are designed to supply operational power to
devices through an Ethernet cable. These adapters make it easy to extend reach of your wireless
local network. The POE101 provides an ideal solution for locating an access point in a building
ceiling or attic, for example, where it has optimal radio coverage without requiring an AC
power outlet. The POE101 can extend the placement of a wireless access point up to 328 feet
(100 meters)
1
by using standard category 5 Ethernet cable.
Important
You should never connect a POE101 base unit LAN OUT to any network devices, such as
hubs, switches, and network interface cards (NIC). Doing so may damage the hub, switch,
NIC device, or even your computer. NETGEAR holds no responsibility for any loss from using
this product. PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE USING
THE NETGEAR POE101 PRODUCT. Using this product means that you agree with this
disclaimer. Damage to the product due to disregarding instructions in this guide will void the
warranty.
POE101 Base unit
POE101 Terminal unit
1 This is a limitation of the Fast Ethernet specification. The total network length is added up from the connection of
the Ethernet switch to base unit, base unit to the terminal unit, and the terminal unit to an access point.