Filter
Top Products
System Maintenance
221
ReadyNAS OS 6.1
SNMP Monitoring
Use SNMP management systems such as HP OpenView or CA UniCenter for remote
monitoring of the ReadyNAS. (Management over SNMP is not supported.)
Configure SNMP
To configure SNMP:
1. Select System > Settings > Services.
2. Click the SNMP button.
The SNMP Settings screen displays.
3. Configure the settings as explained in the following table:
Item Description
Enable SNMP Select the check box to enable SNMP globally. Clear the check box to disable
SNMP globally
.
Community Enter the community. Normally, you would enter public for a read-only community
and private for a read/write community
. You can leave the Community field set to
public (which is the default setting) or you can specify a private name if you have a
more segregated monitoring scheme.