NETGEAR WGR614 Network Router User Manual


 
Reference Manual for the 54 Mbps Wireless Router WGR614 v6
2-2 Introduction
202-10099-01, April 2005
Flash memory for firmware upgrades.
802.11g Wireless Networking
The WGR614 v6 router includes an 802.11g wireless access point, providing continuous,
high-speed 54 Mbps access between your wireless and Ethernet devices. The access point
provides:
802.11g wireless networking at up to 54 Mbps.
802.11g wireless networking, with the ability to operate in 802.11g-only, 802.11b-only, or
802.11g and b modes, providing backwards compatibility with 802.11b devices or dedicating
the wireless network to the higher bandwidth 802.11g devices.
64-bit and 128-bit WEP encryption security.
WEP keys can be generated manually or by passphrase.
WPA-PSK support. Support for Wi-Fi Protected Access (WPA) data encryption which
provides strong data encryption and authentication based on a pre-shared key.
Wireless access can be restricted by MAC address.
Wireless network name broadcast can be turned off so that only devices that have the network
name (SSID) can connect.
A Powerful, True Firewall with Content Filtering
Unlike simple Internet sharing NAT routers, the WGR614 v6 is a true firewall, using stateful
packet inspection to defend against hacker attacks. Its firewall features include:
Denial of Service (DoS) protection.
Automatically detects and thwarts DoS attacks such as Ping of Death, SYN Flood, LAND
Attack, and IP Spoofing.
Blocks unwanted traffic from the Internet to your LAN.
Blocks access from your LAN to Internet locations or services that you specify as off-limits.
Logs security incidents.
The WGR614 v6 will log security events such as blocked incoming traffic, port scans, attacks,
and administrator logins. You can configure the router to E-mail the log to you at specified
intervals. You can also configure the router to send immediate alert messages to your E-mail
address or E-mail pager whenever a significant event occurs.