NETGEAR WGR614v7 Network Router User Manual


 
Configuring the Internet and Wireless Settings 3-1
April 2006
Chapter 3
Configuring the Internet and Wireless Settings
This chapter describes how to use the Smart Wizard Installation Assistant on the Resource CD to
configure your wireless router’s Internet connection and wireless parameters.
Once you are connected to the Internet and your wireless connections are working, you can also
configure the router’s content filtering parameters if you need to change the default settings. See
Chapter 4, “Content Filtering.
If you are an advanced user, you can also configure maintenance (see Chapter 5, “Maintenance)
and advanced (see Chapter 6, “Advanced Configuration of the Router) settings if you need to
change the factory defaults.
Initial Configuration
1. Insert the Resource CD into the CD drive on your PC.
2. Click Setup and follow the instructions. The Smart Wizard Installation Assistant will guide
you through the setup process:
How to change your cabling.
How to connect to the Internet.
How to configure your wireless settings.
If you want to change your Internet or wireless settings later, see “Changing Your
Configuration” on page 3-4.
Note: Do not change your existing Internet connection. Instead, let the Smart Wizard
Installation Assistant on the Resource CD guide you through the setup process.