Filter
Top Products
Installation Guide
NETGEAR® Wireless N150 Access Point WN604
Follow these instructions to set up your WN604 access point. You can also click the
documentation links on the Resource CD or the NETGEAR knowledge base at
http://kbserver.netgear.com. Refer to the Resource CD or click the Documentation
link on the user interface to access the Installation Guide for instructions on
advanced configuration options.
Estimated completion time: 20 minutes.
Tip: Before mounting the access point in a high location, first set up
and test the unit to verify wireless network connectivity.
Package Contents
The NETGEAR® Wireless N150 Access Point WN604 contains the following:
• Wireless access point
• Ethernet cable
• Power adapter
• Vertical stand feet (2)
• Installation Guide
• Resource CD
Set Up the Access Point
1. Connect the access point to your computer:
a. Unpack the box and verify the contents.
b. Prepare a computer with Internet access and an Ethernet adapter. If this
computer is already part of your network, record its TCP/IP configuration
settings. Configure the computer with a static IP address of 192.168.0.210
and subnet mask of 255.255.255.0. See the Reference Manual for more
detailed instructions.
c. Connect the Ethernet cable from the access point to the PC.
d. Securely insert the other end of the
cable into the access point Ethernet
port.
e. Connect the power adapter from the
access point to an AC power outlet.
Note: Connect your access point using only
the power adapter provided with the access
point.
1. Power (green/amber): The green power LED should be lit. If the Power LED
is not lit, check the connections and check to see if the power outlet is controlled
by a wall switch that is turned off. If the LED is blinking, a firmware upgrade is in
process. If the LED is amber, the access point is performing a self-test.
2. WPS (green): The WPS LED blinks green when there is WPS activity
3. WLAN (blue): The WLAN LED is on steady when the wireless access point is
running. The LED blinks when there is wireless activity. If the LED is off, the
wireless is turned off.
4. LAN (green/amber): A green LAN LED indicates 100 Mbps speed. An amber
LAN LED indicates 10 Mbps speed. Blinking indicates activity.
5. Wireless On/Off: Turns the wireless radio on or off.
6. WPS button: Push to automatically configure settings.
12
34 56
78 9 10
7. Power socket.
8. Power On/Off.
9. Ethernet ports.
10. Reset factory defaults.
2. Configure LAN and wireless access.
a. Configure the access point Ethernet port for LAN access. Connect to the
access point by opening your browser and entering http://192.168.0.100 in
the address field.
A login window displays.
b. When prompted, enter admin for the
user name and password for the
password, both in lower case letters.
c. The NETGEAR® Wireless N150
Access Point WN604 user interface
displays.
d. Select Wireless Settings under the Setup menu on the left navigation pane
and configure your wireless interface for wireless access.
e. Under Security, select WEP/WPA Settings and configure the level of data
encryption security for your network.
See the online help or the online reference manual for full instructions.
f. In the left navigation pane under Setup, select Basic Settings,and
configure the IP settings for your network.
Note: If you change the default sub net of the LAN IP address, you will be
disconnected from the ProSafe Wireless N150 Access Point WN604 user
interface. To reconnect, reconfigure your computer with a static IP address within
the new LAN IP sub net.
Tip: Before you deploy your access point, reserve an IP address
(based on the WN604’s MAC address) on the DHCP server. That way,
you can configure the access point with a static IP address that you can
always use to log in to make future configuration changes.
WN604 IG 26July11.fm Page 1 Tuesday, July 26, 2011 6:00 PM