Filter
Top Products
4-2 Getting Started Guide
Then go to Step 2.
Step 2. Select Obtain an IP address automatically.
Step 3. Select Obtain DNS server address automatically, if available.
Step 4. Remove any previously configured Gateways, if available.
Step 5. OK the settings. Restart if prompted.
NOTE: You can also use these instructions to configure other computers on your network to accept IP
addresses served by the Netopia 4-port ADSL Router.
Configuring TCP/IP on Macintosh Computers
The following is a quick guide to configuring TCP/IP for MacOS computers. Configuring TCP/IP in a Macintosh
computer requires the following:
• You must have Open Transport installed, standard in MacOS 8 and higher and optional in earlier system
versions.
• You must have built-in Ethernet or a third-party Ethernet card and its associated drivers installed in your
Macintosh.
b. Some Windows
versions follow a path
like this:
Start menu -> Control Panel -> Network
and Internet Connections -> Network
Connections -> Local Area Connection ->
Properties -> Internet Protocol [TCP/IP]
-> Properties