Netopia 3346-ENT Network Router User Manual


 
3-2 Getting Started Guide
Ethernet: Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on
the LAN.
Once the Netopia 3346-ENT is properly configured and connected to your LAN, PC and Macintosh computers
that have their required components in place will be able to connect to the Internet or other remote IP networks.
Connecting to an Ethernet Network
You can connect a standard 10/100Base-T Ethernet network to the Netopia 3346-ENT using any of its Ethernet
ports.
Netopia 3346-ENT back panel
If you add devices connected through a hub or switch, connect the hub or switch to an Ethernet port on the
Netopia 3346-ENT.
The Netopia 3346-ENT in a 10/100Base-T network
Power
Off / On
LAN
DSL
4
1
2
3
Power
Off / On
LAN
DSL
4
1
2
3
Macintosh
PC
PC
Ethernet
Switch
To connect your 10/100Base-T
network to the Netopia 3346-ENT
through the Ethernet port, use
standard Category 5 Ethernet
cables with RJ-45 connectors.
You can attach additional devices
using standard Category 5
Ethernet cables (not provided)
connected to a 10- or 100Base-T
Ethernet hub or switch. The ports
on the router will auto detect 10-
or 100Base-T. Crossover cables
are not required.
PC
PC
PC
Macintosh