Filter
Top Products
6-2 Getting Started Guide
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 3346-ENT ADSL Router. Your service provider
will supply you with several parameter values. Below is a handy checklist:
DSL Line Configuration Screen
Trellis Coding Enabled ❑ On (default) or
❑ Off
Fast Retrain Enabled ❑ On (default) or
❑ Off
Wiring Type ❑ Tip/Ring (Inner Pair) (default) or
❑ AutoSense
❑ A/A1 (Outer Pair)
Data Link Encapsulation ❑ RFC1483 (default)
or
RFC1483 Mode:
❑ Bridged 1483 (default) or
❑ Routed 1483
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
❑ Off (default) or
❑ On
❑ PPP PPP Mode:
❑ VC Multiplexed (default) or
❑ LLC SNAP
Data Circuit VPI
Data Circuit VPI
0-255 (8 is default)
0-65535 (35 is default)
_______________________
_______________________
Easy Setup Profile Screen
Address Translation
Enabled:
❑ Yes (default) or
❑ No
IP Addressing: ❑ Numbered (default) or
❑ Unnumbered
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for PPP DLEs only)
PPP Authentication:
❑ None (default),
❑ PAP or
❑ CHAP
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Domain Name: _______________________
Primary Domain Name
Server:
_______________________
Secondary Domain Name
Server:
_______________________
Default IP Gateway: _______________________
Easy Setup Security Configuration Screen
Write Access Name: _______________________ Write Access Password: _______________________