Filter
Top Products
3
5. Connect the power cord to the User Station.
6. Press the switch to power-up the RACKMUX.
7. Plug in the power cord(s) and power-up the CPU(s).
Daisy-Chained Host Adapters
Up to 64 CPUs can be connected in a daisy-chain to a create a segment of CPUs controlled by a single user from a User Station. (A
"segment" is a User Station connected to 1 or more Host Adapters) The first Host Adapter is connected to the User Station via the "OUT"
port. Additional Host Adapters in the segment will have CAT5 cable connected from their "OUT" port to another Host Adapter's "IN" port
to enable communications between the user and each CPU in the system (see the illustration on the next page). A Terminating Plug must
be installed in the "IN" port of the last Host Adapter in the segment.
CAT5 Cable
to User Station
Cable to CPU 1
Cable to CPU 2 Cable to CPU 3 Cable to CPU 64
CAT5 Cable
CAT5 Cable
CAT5 Cable
CAT5 Cable
Terminating
Plug (Supplied)
Daisy-chained Host Adapters
IEC Powercord
REAR VIEW OF RACKMUX-V15-N-PRIMUX
NTI
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
RS232
CAT5