Network Technologies MAN027 Switch User Manual


 
11
TECHNICAL SPECIFICATIONS
USB Type B USB Type A VGA Video
Pin # Signal Pin # Signal Pin # Signal Pin # Signal
1+VCC 1+VCC
1RED 9NC
2- DATA 2- DATA
2 GREEN 10 GND
3+DATA 3+DATA
3BLUE 11ID0
4GND 4GND
4ID2 12ID1
5TST 13HS
6RED GND 14VS
7 GREEN GND 15 ID3
8BLUE GND
TROUBLESHOOTING
1. Verify all cables are securely connected and that the installation procedure was carefully followed.
2. If a CPU seems to be locked up,
cycle the power to the KEEUMUX-USBV-2U USB KVM switch OFF, then ON.
unplug the "USB DEVICES" keyboard and mouse cables (not the "CPU x" keyboard and mouse) from the UNIMUX-
USBV-2 USB KVM switch and reconnect them.
reset default values as described on page 6.
reboot the CPU
If the NTI UNIMUX-USBV-2 USB KVM switch still seems work improperly, help may be found in the Frequently Ask
Questions (FAQ’s) section of our website at http://www.nti1.com or call us directly at (
800) 742-8324 (800-RGB-TECH) or
(330) 562-7070 and we will be happy to assist in any way we can.
21
43
Mating face of a USB Type B Female
Mating face of a USB Type A Female
1
2
34
Mating face of a 15HD female
VGA VIDEO
4
2
3
51
10
98 6
7
15
14
13 12 11
Barrel
(Inside
barrel)
(Outside
barrel)
Power Connector
2.1 mm x 5.5 mm Female
5VDC @ 2.0A OUTPUT
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING