Filter
Top Products
59
3
Insert masking sheets
When scanning one or two strips or
strips of different lengths, place the fi lm
at the left end of the holder and cover
any open apertures with the supplied
masking sheets, cutting the sheet to the
appropriate length if necessary. When
scanning one or two strips, place the
fi lm in the bottom rows and the masking
sheets in the top rows.
When scanning three strips of equal
length, place the fi lm at the left end
of the holder. Masking sheets are not
required.
4
Latch the holder
Press the holder closed until the latches
click into place.
Removing Film
Insert your fi ngers into the holes in the lower
portion of the holder and undo the latches.
Open the holder and use the cutouts to pick
the fi lm up by its edges. If the edges of the
fi lm are not accessible, tilt the holder to slide
the fi lm to the hollow at the end of the lower
holder.
Cutouts
Hollow
Masking sheets