Nokia 110S Projector User Manual


 
GB 4
Remote control
This section describes how to operate the Mediamaster using the buttons on the remote control.
mute Press once to turn the sound off/on (mute/unmute).
Press and hold for a few seconds to switch the
Mediamaster into standby mode. In addition,
press this button to switch the Mediamaster on.
ok To confirm a selection.
cursor up Move up in the menus and change to the next channel in
viewing mode.
cursor down Move down in the menus and change to the previous
channel in viewing mode.
cursor left Move left/change settings in menus.
Decrease the volume level in viewing mode.
cursor right Move right/change settings in menus.
Increase the volume level in viewing mode.
opt To display temporary settings (options) while watching TV.
Activate Channel Filtering & Sorting in Navi Bars mode.
info Three different functions:
Pressing once will show current programme name.
Pressing twice will show information about the current
and next programme.
Pressing three times will give the 7-day programme guide
(EPG).
back To go back one level at a time within menus.
To close the Navi Bars.
0 - 9 To change the channel and to select individual menu
options.
NOTE: If 0 is entered as the first digit, the TV Release
functionality is activated (see below).
0 To toggle between the Mediamaster reception or any
other reception to your TV (depending of TV model.)
navi To open and close the Navi Bars.
txt Press to enter Teletext (if available).
tv/radio Toggle between TV and radio mode.