Filter
Top Products
Tools and settings
15
• To add a predefined profile to the profile list, select New > Use a
predefined connection. > Next >, the country of the service provider,
and the operator (service provider). In Select the desired profile(s):,
select the predefined profile of the service provider. To save the
settings, select Finish.
• To copy and edit a predefined profile, select New > Copy and modify
a predefined connection. > Next >. Select the desired options and
Next >. Define the required settings. For details, see “Create a new
connection profile”, p. 15.
Create a new connection profile
To create a new connection profile, in the main view, select Options >
Settings... > Connections (Dial-up) > New > Create a new connection.,
and the desired network type, if the service provider offers several types.
Select Next >, and define the following settings:
•In Choose a name for this connection:, enter a name for the profile. In
Access point name (APN), enter the name you obtained from the
service provider. In Authenticating, enter the user name, password,
and domain you obtained from the service provider.
• To define the domain name server (DNS) and proxy servers, select
DNS/Proxy.
To set the device to fetch the DNS server address automatically,
select Get the DNS server address automatically..
To use a specific server address, select Use the following DNS server
addresses:, and enter the IP address of the primary and (optionally)
secondary DNS.
To use an HTTP proxy, select Use an HTTP proxy., and enter its IP
address and port number.
To save the profile, select Finish.