Filter
Top Products
Transferring data from Nokia 9200 series Communicators
6
Copyright © 2005 Nokia. All rights reserved.
Transferring data from Nokia 9200 series
Communicators
Select Desk→ Tools→ Data mover.
You can use
Data mover
to transfer data, such as contacts
and settings, from your Nokia 9200 series Communicator
to your Nokia 9300 with infrared or a compatible memory
card.
Note: Before you use an existing compatible
memory card with your Nokia 9300, you must
convert the memory card with
Data mover
and
reinstall the applications that you previously
installed to the memory card. However, do not
reinstall any pre-installed applications for the
Nokia 9210 Communicator. Your Nokia 9300
contains a later version of these applications, and
these later versions must be used with Nokia
9300.
Before you start, make sure that there is enough free
memory on your devices or memory card for the transfer.
The amount of required free memory depends on the data
you are transferring. If you have a compatible memory
card, insert it into your Nokia 9200 series Communicator
even if you are going to use infrared as the means of
transfer.
Data mover
can then use the memory card as a
temporary storage. Using a memory card also makes the
transfer process faster.
Do not use the Nokia 9300 when using
Data mover
. If
possible, switch off the cover phone, and make sure that
the battery is not discharged.
There may be additional steps, depending on the type of
information you want to transfer, the method of transfer
you want to use, the amount of free memory on your
previous device or memory card, or the number of
successful or unsuccessful transfers you have made
previously. Read the instructions on the device screen
carefully. The instructions guide you through the process
and include information not covered in this guide.
To transfer data from a Nokia 9200 series Communicator:
1 In the
Data mover
startup screen, press Continue
transfer. If the data is on a memory card, insert it into
your Nokia 9200 series Communicator.