Nokia 9300 Tablet Accessory User Manual


 
Transferring data from Nokia 9200 series Communicators
7
Copyright © 2005 Nokia. All rights reserved.
2 Choose your current city and country and press OK.
3 Activate infrared in both devices, make sure that the
infrared ports of the devices are facing each other, and
press Continue. An infrared connection is established
between the devices.
4 Press Send data collector to send Data collector to
your Nokia 9200 series Communicator. Data collector is
used to collect data from your Nokia 9200 series
Communicator. You only need to send Data collector
once; if you use
Data mover
later, you do not have to
send Data collector again. Data collector is sent to your
Nokia 9200 series Communicator as an infrared
message.
If Data collector is already installed, proceed to step 6.
5 To install Data collector:
On your Nokia 9200 series Communicator, select
the infrared message containing Data collector
(DataColl.SIS), and press Open. If the Open option
is not available, press Save, and open the file from
the location in which you saved it.
When asked for confirmation, press OK.
Select a location for Data collector, and press
Select.
When the installation is complete, press OK.
Proceed to step 7.
6 If Data collector is already installed on your Nokia
9200 series Communicator, select Extras
Data
collector and press Open.
7 On your Nokia 9300, press Connect data coll..
8 Select the data you want to transfer from your Nokia
9200 series Communicator. You can transfer calendar
and contact information, messages, settings,
documents, and images. Some files, such as business