Filter
Top Products
9
4
4.Setting the LAN Settings for Macintosh
4
Enter a new location name and click the [OK] button.
Enter “IEU2” as an example.
5
Click [Show] and [AirPort].
• For wired LAN connection, click [Built-in Ethernet].
After change to [Built-in Ethernet], set “Manually” in [Configure IPv4] to specify the
IP address and other configurations ( page 15 ) or set “Using DHCP”.
Note
If neither Airport card nor Airport extreme card has been inserted in the Macintosh
computer, [AirPort] cannot be chosen.
6
Click the [Apply Now] button.
7
Click the [ ] button at the upper left on the Network configuration window.
The Network configuration window will be closed.