Nokia M5122 User Manual
E Copyright Nokia Networks Oy
C33874002SE_A0
16
Routing page
On the Local Network Routing sub page you can set static routes and
enable/disable dynamic routing protocols (Routing Information
Protocol versions 1 and 2).
To enable dynamic routing select the Routing protocol version from
the pull-down list and click the Apply button. RIP versions 1 and 2 are
supported. Both v1 and v2 option enables the receiving of both RIPv1
and RIPv2 packets.
To add a static route, type in the Destination network IP address, the
Subnet mask of the destination network, and the Gateway and the
Interface through which the destination network can be reached. Then
click the Add new button.
Figure 12 Local Network Routing page