Filter
Top Products
Nokia M5122 User Manual
E Copyright Nokia Networks Oy
C33874002SE_A0
4
2.3 Step-by-step installation procedures
In this section, we present two installation procedures: ADSL data
services and Telephone and ADSL data services. To use both telephone
and ADSL services, you will need a POTS splitter. This manual gives
installation example for a Nokia splitter T66270.
In these examples, we assume that you have installed your Ethernet
card properly and that your service provider has provided you with
instructions how to set your PC’s networking options.
ADSL data services
1.
2.
3.
4.
5.
Figure 4 M5122 with cables connected (ADSL services only)
1. Plug the mains power cord to a mains outlet. M5122 can be
connected to an earthed socket outlet only.
2. Switch on M5122. The PWR indicator lights up. After a while, the
red STA indicator blinks and then remains unlit. M5122 is now
functional.
3. Connect the Ethernet cable between your PC’s 10Base-T
connector and the Ethernet connector on the M5122 back panel
(ETH-1, ETH-2, ETH-3, or ETH-4).
4. Switch on your PC. The indicator corresponding the Ethernet port
you connected your PC to becomes green when your PC has
started. This indicator blinks when there is traffic in the
corresponding Ethernet port.