Filter
Top Products
Internet connections
22
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
A Bluetooth connection does not require that the
compatible phone and your internet tablet be in line of
sight, but both devices should be within 10 metres (32
feet) of each other. Connections can be subject to
interference from obstructions, such as walls or other
electronic devices.
Do not create connections to devices using Bluetooth
technology that you do not trust.
Select a phone
To select a phone to be used for internet connection, tap
and select Settings > Control panel. In Control panel,
select Phone. Although only one device can be selected as
a phone at a time, you can pair several devices with your
internet tablet.
To pair a phone with your internet tablet, do the following:
1. Activate the Bluetooth connection on your mobile
phone.
2. In Control panel > Phone, select New. Select a phone
opens, and your device begins to search for compatible
devices that support Bluetooth wireless technology.
3. Select the desired phone from the list of found devices
and OK. Your device generates a passcode.
4. In Pair with device, use the generated passcode or
replace it with a passcode of your own. To define
whether the paired device should be trusted (your
phone can connect to the internet tablet without
notification) or not after it is paired, select or deselect
Set as trusted device. Select OK, and enter the same
passcode on your compatible phone.
5. After successful pairing, the mobile operator setup
wizard is presented. Use it for saving your internet
connection settings. If you have already saved the
settings or plan to save them later from the control
panel, select Cancel.
To access the setup wizard afterwards, tap and
select Settings > Control panel. In Control panel,
select > Tools > Mobile operator setup wizard....
6. Select Finish to save the settings.