Filter
Top Products
MW1122 Administrator Manual
E Copyright Nokia Networks Oy
C33902001SE_00
5-74
Command Stop PPP negotiation when authentication failure
occurs
Description When enabled, the athentication failure causes the
PPP negotiation to stop. The command reset ppp
vccx is required to restart the PPP negotiation.
Syntax [no] ppp autostop
Arguments no disables PPP autostop.
Example
MW1122(conf-vccx)#ppp autostop
MW1122(conf-vccx)#
Command Switch on/off IP function on ATM channel
Description Switches on/off IP function on the ATM channel.
Syntax [no] ip address <ip-address> <ip-mask>
Arguments no switches IP function off.
ip-address is the IP address you want to assign to
the ATM channel. IP address 0.0.0.0 with subnet mask
0.0.0.0 can be used with ppp-vc encapsulation if the
dynamic IP address negotiation is required.
ip-mask is the subnet mask.
Example
MW1122(conf-vccx)#ip address 192.168.132.13
255.255.255.0
MW1122(conf-vccx)#
Command Switch on/off RIP send function on ATM channel
Description Switches on/off RIP send function. When enabled,
MW1122 sends Routing Information Protocol messages
to other routers.
Syntax [no] ip rip-send {rip-send-mode}
Arguments no switches rip-send function off.
v1 send-mode selects RIP version 1.
v2 send-mode selects RIP version 2.
compatible-v1 send-mode selects the sending of
RIPv2 packets using broadcast.
Example
MW1122(conf-vccx)#ip rip-send v1
MW1122(conf-vccx)#