Nokia MW1122 Computer Monitor User Manual


 
Interfaces and indicator lights
E Copyright Nokia Networks Oy
C33902001SE_00
3-3
PIN Signal
3 DSL1
4 DSL2
Table 3-2 ADSL interface pin-out numbering
3.2 Command line interface
The command line interface (CLI) is RS-232 interface with an RJ-45
mechanical connector. The pin-out numbering is shown in Table 3-3.
18
Figure 3-4 CLI connector
PIN Signal Direction
M5112-ter-
minal
MDI signal
1 107 DSR
(const. ON)
> Data set ready
2 108 DTR < Data terminal ready
3 109 DCD
(const. ON)
> Data channel re-
ceived line signal de-
tector
4 102 SG Signal ground
5 103 TxD < Transmitted data
6 104 RxD > Received data
7 105 RTS
(not in use)
< Request to send
8 106 CTS
(const. ON)
> Clear to send
Table 3-3 Command line interface pin-out numbering