Filter
Top Products
Managing MW1122
E Copyright Nokia Networks Oy
C33902001SE_00
5-3
5.1.2 Routing/tunneling IP, bridging other protocols
When the application requires routing IP packets and bridging all other
protocols, then IP address has to be configured and bridging enabled
for all relevant interfaces. The result is that IP packets will be routed
and all other packets will be bridged. In the configuration example
below, LAN and WLAN interfaces route IP traffic and bridge all other
protocols. ATM VCC1 routes IP traffic and ATM VCC2 interfaces
bridges all traffic.
MW1122> show config running
eth
ip address 192.168.1.1 255.255.255.0
bridging
wlan
network-name nokia
radio-channel europe 13
ip address 192.168.2.1 255.255.255.0
bridging
vcc1
pvc 0 101 ip-llc
ip address 10.98.16.1 255.255.255.0
vcc2
pvc 0 102 eth-llc
bridging
MW1122>
5.1.3 Routing/tunneling IP, bridging all protocols including IP
When IP packets that are received from LAN/WLAN must be
routed/tunneled to some ATM VCC and bridged to some other ATM
VCC, then the VBRIDGE interface must be used as this common IP
interface for all bridged interfaces. LAN and WLAN interfaces are in
this case configures as bridge only.
MW1122> show config running
eth
bridging
wlan
network-name nokia
radio-channel europe 13
bridging
vcc1
pvc 0 101 ip-llc