Filter
Top Products
MW1122 Administrator Manual
E Copyright Nokia Networks Oy
C33902001SE_00
2-6
LAN interface Vbridge
(gateway/host
interface)
ATM VCC inter-
faces
WLAN inter-
face
Route/tunnel IP, bridge all other traffic
Routing (IP ad-
dress confi-
gured) and
bridging acti-
vated.
Routing (IP ad-
dress confi-
gured) and
bridging acti-
vated or slaved
to LAN interface
(single subnet).
VCCs that only
route or tunnel
have routing (IP
address confi-
gured) or PPTP
local tunneling
activated.
VCCs that both
bridge and
route have addi-
tionally bridging
activated. This
requires ETH-
LLC encapsula-
tion to be used
on those VCCs.
VCCs that only
bridge have
only bridging
activated.
Typically not
used in this
case. The unit
can be man-
aged locally
through LAN
and WLAN in-
terfaces and re-
motely through
a separate
management
VCC or the ATM
VCCs which
have routing
activated.
Route/tunnel IP, bridge all other including IP
Bridging acti-
vated
Bridging acti-
vated or slaved
to LAN interface
(single subnet).
VCCs that only
route or tunnel
have routing (IP
address confi-
gured) or PPTP
local tunneling
activated.
VCCs that only
bridge have
only bridging
activated.
Used as a com-
mon IP gateway
interface for
both LAN and
WLAN inter-
faces.
Table 2-1 Operational modes
LAN and WLAN interfaces
LAN and WLAN interfaces can be configured individually to bridge
and route packets. There are three different operational modes in both
LAN and WLAN interfaces: