Filter
Top Products
Managing MW1122
E Copyright Nokia Networks Oy
C33902001SE_00
5-69
Command Set wireless encryption keys
Description Sets the wireless encryption keys 1, 2, 3, and 4.
Syntax [no] wep key-entry <id> <key-length> <key-value>
Arguments no switches the key off.
id argument can be 1, 2, 3 or 4.
key-length can be 40-bit or 128-bit.
key-value is a hexadecimal string of 10 (40-bit) or 32
(128-bit) characters.
Example
MW1122(conf-wlan)#wep key-entry 1 40-bit 1234567890
MW1122(conf-wlan)#
Command Define access control list
Description Defines a list of addresses (Client table) which are per-
mitted to join the wireless LAN. There are two com-
mands here. You can use the default encryption key by
only entering the name string and the physical address
(MAC address) if a default key has been activated (See
Select default encryption key command). If the default
key has not been activated, the connection will not be
encrypted. You can also set a specific encryption key
for this station by entering the the key length and key
value after the physical address argument.
Syntax [no] sta<name-string><phys-address>
[no] sta <name-string><phys-address> <key-length>
<key-value>
Arguments no switches off access control list.
name-string is a name given to this station.
phys-address is the physical address (MAC address)
of the permitted wireless station.
key-length is the key length of the wireless encryp-
tion key. The length can be 40 or 128 bits.
key-value is a hexadecimal string of 10 (40-bit) or 32
(128-bit) characters.
Example
MW1122(conf-wlan)#sta Home 00:e0:03:04:79:bc 40-bit
1234567890
MW1122(conf-wlan)#