Nokia MW1122 Computer Monitor User Manual


 
Managing MW1122
E Copyright Nokia Networks Oy
C33902001SE_00
5-11
1. Use CLI to issue
install tftp:/<ip-address>/Gx1x2200.R00 command,
where <ip-address is the IP address of the TFTP server
containing the new software and
Gx1x2200.R00 is the name of the
file to be downloaded. The command copy
tftp:/<ip-address>/Gx1x2200.R00 image.exe can be used
alternatively.
2. After you will see transfer status SUCCESSFUL
message, restart MW1122 to activate the new software.
Downloading configuration or application from monitor
Monitor is a small application that is executed before the actual
software image is started. Typically the Monitor automatically loads
the application file image.exe. You can activate the Monitor by
pressing m followed by o in the very beginning of the system
startup:
local MAC=00:40:43:02:36:72; Using M111/850 eth conf
Type m (fast) followed by o (in 10 sec) to
activate Monitor
Nokia Networks (C) 1999
Nokia Boot
B-R0.0.0. built on Apr 4 2000 11:27:55
MON>
The following commands are available for file handling in the
Monitor:
D rename
D delete
D dir
MW1122 has two methods of retrieving files:
D TFTP
D XMODEM
You can retrieve files from a TFTP server using the commands in the
following example:
MON>ipa 192.168.1.1
ip=192.168.1.1
ipserver=0.0.0.0
ipgw=0.0.0.0
serverfile=
MON>ips 192.168.1.100