Filter
Top Products
Getting started
8
3. Plug the USB connector of the
cradle to the AD-48 charger
adapter that is supplied with the
pen.
4. Plug the charger into a wall
outlet, and connect the charger
cable into the adapter.
While the battery is charging, the
battery indicator slowly flashes
red, yellow, or green depending on the charge level of the battery.
5. When the battery is fully charged, the battery indicator turns green.
Disconnect the charger cable from the adapter, unplug the charger
from the wall outlet, disconnect the USB connector from the
adapter, and remove the pen from the cradle.
Battery level indication
The battery indicator shows how much charge is left in the pen battery.
When the battery indicator is green, the pen is sufficiently charged.
When the battery indicator is yellow, the battery is less than 50%
charged.
When the battery indicator is red, battery power is low; when the
indicator flashes red, battery power is too low for operation. Recharge
the battery.
You can also check the battery level using the charge meter in the
Battery level indication section at the back of a supplied notepad. Move
the pen tip from left to right. The pen indicates the current charge level
by vibrating.
■ Switch the pen on or off
To switch on the pen, take off the pen cap. The pen vibrates once, and
the battery and page indicators turn on. When the page indicator is
green, the pen is ready to writing. The pen is automatically switched on
when you insert it into the USB cradle that is connected to a powered
USB port or to the AD-48 charger adapter.