Filter
Top Products
M1122 User Manual
E Copyright Nokia Networks Oy
C33906002SE_00
16
3.1.7 Save Config page
When you change the configuration, all configuration changes are
activated immediately without restart/reload. However, the
configuration will not be saved into the nonvolatile memory. If M1122
is restarted or powered down without saving the configuration, the old
configuration will be restored. Clicking the Save configuration button
saves the configuration into the nonvolatile memory and the old
configuration cannot be restored through the web interface.
Figure 14 Save Config page
4 Features
M1122 can operate as a bridge and/or Internet Protocol (IP) router
between Ethernet and the virtual channels of ADSL/ATM interfaces
supporting both dynamic and static routing.
4.1 Interfaces
M1122 has the following interfaces:
D Four Ethernet interfaces (LAN)
D 8 ATM VCC interfaces
D ATM VCC management interface