Filter
Top Products
47
Appendix A
EMC emission level protection for the
1005r Server
To lower the EMC emission level, ferrite cores are installed with one loop
(see the following diagram) on the following external cables:
•
Ferrite Core (TDK and part number ZCAT3035-1330)—for the triple
DS30X I/O cable (Nortel and part number NTRH2014E6). There are
three ferrite cores at each end of the cable.
CAUTION
Risk of equipment damage
The ferrite cores are preinstalled on the provided cables. It is not
your responsibility to attach these ferrite cores to these cables.
However, you must ensure that these ferrite cores are in place to
keep the EMC emission levels low.
Nortel CallPilot
1005r Server Hardware Installation
NN44200-308 01.06 Standard
5.0 15 May 2008
Copyright © 2006-2008, Nortel Networks
.