Filter
Top Products
Configuring a network management connection to a 4400 29
Passport 4400 and 6400 Quick Start Guide 6.0S1
Add the FRDTE
PROV> add frdte/699
PROV> delete frdte/699 framer
PROV> add frdte/699 vframer
PROV> set frdte/699 vframer logicalProcessor lp/6
PROV> add frdte/699 staticDlci/100
The above command creates a static DLCI between the FRUNI service
and the FRDTE. Each 4400 in the network requires a unique DLCI.
PROV> set frdte/699 vframer otherVirtualFramer fruni/
699 vframer
Add the Virtual Router
PROV> add vr/1
PROV> add vr/1 ip
PROV> add vr/1 ip rip
PROV> add vr/1 pp/frdte699rg1
PROV> add vr/1 pp/frdte699rg1 ipp
PROV> set vr/1 pp/frdte699rg1 linkToMedia frdte/699
rg/1
rg/1 (remoteGroup) is created by default. Additional remote groups
need to provisioned.
PROV> set frdte/699 rg/1 LinkToFrDteDlci frdte/699
stdlci/100
The above command links the static DLCI to the remote group
containing the 4400. This command must be repeated for each 4400
connected to a 6400 network node.
PROV> set vr/1 pp/frdte699rg1 LinkToMedia frdte/699
rg/1
PROV> add vr/1 pp/frdte699rg1 ipp logicalIf/198.47.2.1
PROV> set vr/1 pp/frdte699rg1 ipp logicalIf/198.47.2.1
broadcastAddress 198.47.1.255