Filter
Top Products
82 Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment
CAUTION
Electrostatic discharge can damage hardware.
Procedure steps
Step Action
1
Locate the slot where you want to install the module.
2
Remove the installed module or the filler panel.
For instructions, see "Removing a module" (page 76) or "Removing
a filler panel" (page 73).
3
Make sure that the insert/extract levers are extended away from
the front of the module (see "Ejecting the module from the chassis:
8003, 8006, and 8010 chassis" (page 79) or "Ejecting the module
from the chassis: 8010co chassis" (page 80)).
4 Slide the module into the slot using the slot module guides
("Installing a module: 8003, 8006, and 8010 chassis" (page 82) or
"Installing a module: 8010co chassis" (page 83)).
Installing a module: 8003, 8006, and 8010 chassis
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.