Filter
Top Products
Alteon OS Command Reference
The Configuration Menu
239BMD00007, November 2007
/cfg/l2/gvrp/port
GVRP Port Configuration
Use the following commands to configure GVRP settings for the port.
off
Globally turns GVRP off. With GVRP off, the switch does not process GPDUs.
When you turn GVRP off, existing dynamic VLANs are deleted.
cur
Display current GVRP configuration.
[GVRP Port EXT2 Menu]
setreg - Set learning GPDU for registrar of this port
setapp - Set sending GPDU from applicant of this port
ena - Enable GVRP support for this port
dis - Disable GVRP support for this port
cur - Display current GVRP port parameters
Table 6-43 GVRP Port Menu Options (/cfg/l2/gvrp/port x)
Command Syntax and Usage
setreg normal|block
Configures GPDU learning for the port’s GVRP registrar, as follows:
Normal: The registrar listens for GPDUs, and learns GVRP attributes from other devices on the
network.
Block: The registrar does not listen for GPDUs from other devices.
setapp normal|block
Configures GPDU sending for the port’s GVRP applicant, as follows:
Normal: The applicant sends GPDUs to other devices on the network.
Block: The applicant does not send GPDUs to other devices.
ena
Enables GVRP on the port.
dis
Disables GVRP on the port.
cur
Display current GVRP port configuration.
Table 6-42 GVRP Menu Options (/cfg/l2/gvrp)
Command Syntax and Usage