Filter
Top Products
Initial Setup Instructions
3-3
8600-A2-GN20-20
October 1997
3. Do one of the following at the (nnn.nnn.nnn.nnn): prompt:
— To accept the subnet mask, press Return.
— To enter a different subnet mask, enter a new subnet mask and press
Return.
The system highlights the OK to restart?: prompt.
4. Type y at the yes/no: prompt to restart the card or n to decline the restart. If
you type y, the card restarts. You can now log in remotely using telnet or an
SNMP NMS to configure the cards. Refer to the
HotWire DSLAM for 8540
and 8546 DSL Cards User’s Guide
for detailed instructions.