Filter
Top Products
Index
IN-2
8600-A2-GN20-20
October 1997
I
installation site consideration, 2-3
installation tasks
connecting to a modem for remote management,
2-27
connecting to a POTS splitter, 2-23
connecting to a terminal or computer, 2-26
connecting to an MDF, 2-23
connecting to an SNMP management system, 2-25
connecting to Ethernet hubs or switches, 2-24
installing the chassis, 2-5
installing the DSL cards, 2-19
installing the MCC card, 2-18
summary of tasks, 2-4
supplying power, 2-13
verifying the installation, 2-21
installing the chassis
on a desktop or table, 2-5
rack with threaded screw holes, 2-10
rack without threaded screw holes, 2-12
interconnecting the stack, 2-5
L
LEDs
fan alarm, 4-2
on the 8600 chassis, A-1
on the MCC card, A-2
power, 4-1
system alarm, 4-2
load sharing, 1-4
M
Main Distributing Frame (MDF), 2-23
making cable connections, 2-22
Management Communications Controller (MCC) card,
1-3
installing the card, 2-18
removing the card, 2-19
setting the IP address, 3-1
setting the subnet mask, 3-1
management information bases (MIBs), 1-4
Media Access Control (MAC) address, 2-19, 2-20
modem connection, 2-27
N
National Equipment Building Standards (NEBS), 2-7
O
operating environment specifications, C-2
organization of guide, iv
P
package contents
associated hardware, 2-2
chassis, 2-2
documentation, 2-2
physical dimensions, C-1
pinouts
8-pin modular asynchronous terminal, B-3
DB25 adapter, B-3
LAN/WAN connectors, B-2
management 10BaseT connector, B-1
management IN and OUT connectors, B-2
Telco 50-pin for DSL loops and POTS splitters, B-4
POTS Splitter, 1-1, 2-23
power
failure, 4-1
using a single dc power source, 2-13
using ac power with dc power backup, 2-16
using only ac power source, 2-16
using two dc power source, 2-14
power considerations, 2-3
power redundancy, 1-4
power specifications, C-2
pre-installation considerations, 2-3
R
rack mounting
with threaded screw holes, 2-10
without threaded screw holes, 2-12
related documents, v
remote configuration setup instructions, 3-1
Remote Termination Unit (RTU), 1-1
removing card
DSL card, 2-20
MCC card, 2-19