Filter
Top Products
41
Removing an Installed GBIC
To remove an installed GBIC:
1. If the GBIC has spring tabs, press in on the tabs on
each side of the GBIC as you pull the GBIC out of
the MDA’s Host port (Figure 14).
Figure 14. Removing a GBIC
2. If the GBIC has an extractor handle, grasp the
handle and pull firmly to remove the GBIC from
the MDA’s Host port.
Cabling Specifications for GBICs
For more information about supported GBICs and for
details about cabling specifications, refer to the Gigabit
Interface Converter (GBIC) Installation Guide (part
number 208723-A).
9826FA