Filter
Top Products
25
Copyright © 2003, Nortel Networks MCP RTP Media Portal Basics
Nortel Networks Confidential
Configuration management
How this chapter is organized
This chapter is organized as follows:
• “Network strategy” on page 25
— “Configuration procedures” on page 25
— “Configuration tabs and properties” on page 27
Network strategy
The network strategy is to configure all of the components in a central
location. The central location for configuration is the System
Management Console.
The following sections provide information on configuring the RTP
Media Portal.
Configuration procedures
Login to the System Management Console. For detailed procedures on
logging into the System Management Console, refer to the MCP
System Management Console Basics.
Adding the RTP Media Portal component
This procedure assumes that the server on which the RTP Media Portal
will be deployed, has already been configured. For example, Figure 13,
“Adding the RTP Media Portal component” on page 26 shows the RTP
Media Portal component being deployed onto the previously configured
server, “RTP Portal”.
From the System Management Console
1 To add the RTP Media Portal component, right-click on
Component under the Server definition and select Add >
Component as shown in Figure 13, “Adding the RTP Media
Portal component” on page 26.