Filter
Top Products
23
Figure 6. Installing an MDA
4. Press the MDA
firmly
into the Uplink Module slot.
Be sure that the MDA is fully seated into the mating
connector.
5. Secure the MDA by tightening the thumb screws
on the MDA front panel.
6. Attach devices to the MDA ports.
Refer to your device user guide for instructions on
attaching devices to the MDA ports.
BS45059B
Uplink/Expansion Module
2826 2725
3
1 = Card guides
2 = Uplink module slot
3 = BayStack or Accelar switch
2
1
400-4TX MDA
Activity
100
10
F Dx
302403-C.mkr Page 23 Monday, May 24, 1999 4:30 PM