Filter
Top Products
Removing the AC power supply 21
You should replace a failed power supply as soon as possible to restore
high-availability operation.
CAUTION
To maintain proper cooling, never operate the Ethernet Routing
Switch 8300 Series chassis with an empty power supply bay. If
you are replacing a failed power supply and you do not have a
power filler panel, leave the failed power supply installed until a
replacement power supply is available.
To remove an AC power supply:
Step Action
1
Turn off the power switch on the power supply that you are replacing.
2
Disconnect the power cord from the power outlet and from the power
supply.
3
Loosen the two retaining screws on the power supply.
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
NN46200-301 03.01 Standard
4.0 27 August 2007
Copyright © 2007, Nortel Networks
.