Nortel Networks 1050 Switch User Manual


 
Chapter 1 Hardware overview 29
Nortel VPN Router Installation — VPN Router 1010/1050/1100
Table 4 describes the Ethernet port LEDs on the VPN Router 1010/1050/1100.
10/100BASE-TX Ethernet interface card LEDs
Figure 7 shows the LEDs on the 10/100BASE-TX Ethernet interface card.
Figure 7 LEDs on the 10/100BASE-TX Ethernet interface card
Table 5 describes the LEDs on the 10/100BASE-TX Ethernet interface card.
Table 4 Ethernet port LED indicators
LED Indicator Description
10/100 Mb/s
(Amber)
On The LAN port is operating at 100 Mb/s.
Off The LAN port is operating at 10 Mb/s.
Link/Act
(Green)
On The cable connections between the LAN port and the
hub are good.
Off The cable connections between the LAN port and the
hub are faulty.
Flashing The LAN port is sending or receiving network data.
The frequency of the flashes increases with
increased traffic.
Table 5 LED indicators on the 10/100BASE-TX Ethernet interface card
LED Indicator Description
ACT/LINK Steady green or
Flashing green
The card is sending or receiving network data. The
frequency of the flashes increases with increased
traffic.
Off The card is not sending or receiving data.
10/100TX Green The port is operating at 100 Mb/s.
Off The port is operating at 10 Mb/s.
CS260009B
DATA
ACT/LINK
100TX
10/100Mbs
Activity/Link