Filter
Top Products
Chapter 1 Contivity 4500 Option Installation 31
Installing Hardware Options for the Contivity VPN Switch
Figure 7 Removing a Contivity 4500 hard disk drive
3
Insert the replacement hard drive fully, and lock it by turning the key
clockwise. Make sure the hard disk drive LED shows the proper drive
number.
4
Replace the front bezel.
5
Reload the software on the disk. Refer to “Using the Recovery Diskette,” in
Configuring the Contivity VPN Switch for more information on using the
recovery diskette.
Software
Enable the switch by following these steps:
1
Use your Web browser to navigate to the switch, and go to the Admin!File
System display.
2
Click on the drive and click the Enable button.
Alert/Fail
Boot/Ready
CS460011A
Drive 0
Drive 1
Insert and turn key, then
remove hard disk by handle.