Nortel Networks Passport ARN Routers Network Router User Manual


 
Index-6
114200-E Rev 00
ifconfig command, A-2
requirements, 2-2, 2-6
using, 2-6, 2-8
Nonvolatile File System (NVFS), removing, 3-13
Nortel Networks
Proprietary PPP protocol, worksheet for, B-12
Standard protocol, A-3
O
OSPF, worksheet for, B-9
P
PC console interface, connecting to, 1-23
PCMCIA
LED, 3-3
See also Flash memory
physical specifications, C-1
pin assignments
console interface, C-17
DSU/CSU interface, C-13
Ethernet
10/100BASE-Tx, C-7
AUI, C-6
ISDN
S/T interface, C-12
U interface, C-11
ISDN port connector, C-14
modem interface, C-18
RJ-11, C-16
serial interface, C-10
token ring
STP interface, C-8
UTP interface, C-9
V.34 interface, C-16
ports. See interfaces
power
cables, 1-30
specifications, C-2
switch, 3-11
Power (Pwr) LED, 3-2
powering on the ARN, 3-11
PPP protocol, Nortel Networks proprietary, B-12
PPP wide area protocol, worksheet for, B-14
preparing for installation, 1-1 to 1-8
product support, xxiv
publications
hard copy, xxiii
Q
Quick-Start procedure
commands, B-17
inst_arn.bat script, 2-14
running, 2-14, B-16
using, 2-14, B-17
worksheet, B-5 to B-8
R
rack-mounting
procedure for, 1-6 to 1-8
required hardware, 1-6
receive (Rx) LED, 3-3, 3-5, 3-9
receive data (RxD) LED, 3-7, 3-8
received line signal detection (RLSD) LED, 3-6, 3-9
received line signal detection 3 (RLSD3) LED, 3-6
received line signal detection 4 (RLSD4) LED, 3-6
received line signal detection 5 (RLSD5) LED, 3-6
receiver (RCVR) LED, 3-4, 3-5
redundant power supply (RPS) LED, 3-3
reset button
LEDs and, 3-12
using, 3-12
RIP routing protocol, worksheet for, B-8
RJ-11 interface pin assignments, C-16
RMON (remote monitoring), 3-3
router software image
default boot location, 2-4
defined, 2-1
RS-232 connections
console (service) interface, C-15, C-16
serial interface, C-9
service modem interface, C-17
RS-422 connections, C-9