Filter
Top Products
Setting up the main office Page 43 of 258
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
4 Enable the features for the branch office zone in LD 11.
End of Procedure
Configuring zone parameters using
CS 1000 Element Manager
Use Element Manager to configure the branch office specific zone properties
and time difference.
1 Select IP Telephony > Zones in Element Manager navigator.
The Zones window opens (Figure 2 on page 44). The zone list is the main
window used for zone configuration.
LD 117 – Enable features for an SRG zone.
Command Description
ENL ZBR <zone> ALL Enables features for branch office <zone>.