Filter
Top Products
ENGLISH
NovaJet PRO 600e
Quick Start 23
Cartridge recognition
The printer is designed to use only ENCAD PRO 600e cartridges. To eliminate potential
damage to the printer, a Cartridge Recognition feature checks to ensure that ENCAD PRO
600e cartridges are installed, and that they are installed properly. Cartridge recognition is
performed when a print request is received (i.e., image data, prime, etc.).
In addition to cartridge recognition, the printer automatically performs tests on the
cartridges and uses the information to improve image quality, monitor cartridge life, and
update the user with system status. Some tests are performed between prints and require
no user input, while others require user input.
Cartridge-related error messages are listed in Appendix F of the User Guide.
To clear a cartridge-related error, press Access Cartridges to move the carriage to the
position which allows replacement of the ink cartridges. Check to make sure you have
ENCAD NovaJet PRO 600e cartridges installed in each position, that they all contain the
same type of ink (i.e. GA, GS, or GO) and all cartridges are installed properly. Install new
cartridges if necessary.
➪➪
➪➪
➪ To clear cartridge recognition error:
1 Press Access Cartridges to move the carriage to the position which allows
replacement of the ink cartridges.
2 Verify that four ENCAD PRO 600e cartridges are installed. Replace any
invalid cartridges.
3 Press OK. If the problem has been corrected, the printer will proceed with
the print request. If the problem has not been corrected, the printer will
beep.