Filter
Top Products
5/17/2007 9
FRONT PANEL
102MC/MCE
From Top to Bottom:
SPD Speed LED
LNK/ACT Link/Activity LED
RJ45 Ports Auto sensing 10/100BaseT Connection
Green LED lights when Power is connected
NOTE: The RJ45 data port has two LED’s located at the left side of the connector. The top LED indicates
Activity (ACT), and the lower LED indicates Link (LNK) status.
LED’s: The table below describes the operating modes:
LED Color Description
ON Power is Applied.
OFF Power is OFF.
ON Link established, no Activity on cable.
BLINKING
Link established, Activity on cable
LNK/ACT
OFF No link activity on cable.
SPD
ON LINK is 100Mbps.
OFF Link is 10Mbs.