N-Tron 105TX-POE Switch User Manual


 
Rev. 041008
18
KEY SPECIFICATIONS
Physical
Height: 3.50” (8.89 cm.)
Width: 1.50” (3.81 cm.)
Depth Including Din-Rail Clip: 4.22” (10.72 cm)
Weight: 0.70 lbs. (0.32 kg)
Electrical
Input Voltage: 46-49 VDC
Input Current: 1.6 A @ 48 VDC (under full load)
65 mA @ 48 VDC (no POE in use, switch in full use)
Inrush Current: 26 Amp/1.3 ms @ 48VDC
Input Ripple: Less than 100 mV
Input Wire Size: 10-20 AWG
Environmental
Operating Temperature: -40°C to 85°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 90% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Network Media
10BaseT: > Cat-3 Cable
100BaseT: > Cat-5 Cable
100BaseFX: Multimode: 50-62.5/125µm Fiber
Singlemode: 7-10/125µm Fiber
Fiber Transceiver Characteristics
Fiber Length:
2km* 15km** 40km**
80km**
TX Power Min/Max
-19dBm/-14dBm
-15dBm/-7dBm
-5dBm/0dBm -5dBm/0dBm
RX Sensitivity Max:
-32dBm -34dBm -34dBm -34dBm
Wavelength:
1310nm 1310nm 1310nm 1550nm
*=Multimode ** =Singlemode
Connectors
10/100BaseTX: RJ45 UTP Port
100BaseFX: SC or ST Duplex Port
Recommended Minimum Wiring Clearance:
Front: 2” (5.08 cm)
Top: 1" (2.54 cm)