Filter
Top Products
NVIDIA Corporation
Quadro FX 4500/5500 SDI User’s Guide – Version 2.0 29
C
HAPTER 3
Windows–Using the Graphics to SDI Control Panel
Changing SDI Settings Under Dualview
To change the SDI settings once Dualview is enabled,
1 Open the Microsoft Display Properties Settings page as described in steps 1 and 2
above
2 Right-click Display #2, then from the pop-up menu click Properties.
3 Click the Quadro FX 4500 SDI or Quadro FX 5500 SDI tab and then click the Graphics
to SDI tree item from the side menu.
You can now change the SDI settings for the 2nd display, or SDI output. Because
Dualview is enabled, the Enable/Disable controls are not available and the panel says
ʺSend SDI output to: NVIDIA SDIʺ.
Figure 3.9
Graphics to SDI Page with Dualview Enabled