Filter
Top Products
Configuring the BIOS
NVIDIA Corporation
October 17, 2007 | DU-03597-001_v01 33
Press Enter to auto-detect IDE and SATA channels in the system. Once the
channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing
Zone, and Sector are automatically filled in.
q None
There is no HDD installed or set.
q Auto
The system can auto-detect the hard disk when booting up.
q Manual
When you set the channel to [Manual] and change Access Mode to [CHS],
you can then enter the number of cylinders, heads, Precomp, landing zone,
and sector. You can manually enter the values or you can press Enter to
display a window that tells you the min and max values.
The BIOS supports the following HDD
Access Modes:
Ø CHS
For HDD less than 528 MB.
Ø LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
Ø Large
For HDD greater than 528 MB but not supporting LBA.
Ø Auto
Recommended mode.
IDE HDD Auto-Detect [Press Enter]
IDE Channel 0 Slave [Manual}
Access Mode [CHS]
Capacity 0 MB
Cylinder .....0
Head [ 0]
Precomp [ 0]
Landing Zone [ 0]
Sector [ 0]
Cylinder
Min= 0
Max=65535
Key in a DEC number :
#$
:Move ENTER:Accept ESC:Abort
Press ENTER to display sub-
menu
or enter number manually