Filter
Top Products
Introduction to the Océ VarioPrint® 6000 MICR
+
line
Introduction
The Océ VarioPrint® 6000 MICR
+
line is a series of high-volume, cut-sheet printers. These printers
support magnetic ink character recognition (MICR). MICR printing is intended primarily for
transaction printing of valuable documents like cheques. A magnetic reader can read documents
printed with MICR toner.
The Océ VarioPrint® 6000 MICR
+
line uses the Océ Gemini Instant Duplex Technology. This
technology enables the machine to print MICR toner on both the front side and the back side of a
sheet at the same time. Depending on your version, the sustained print speed ranges from 170,
200 to 250 images per minute (A4 / Letter) when you print a 2-sided document. The print speed
for 1-sided documents (A4/Letter) is 125 images per minute.
The Océ VarioPrint® 6000 MICR
+
line prints only with MICR toner. A combination of MICR toner
and regular toner is not possible. However, you can also print regular documents with MICR
toner.
This section gives a short description of the main features of the printer.
Overview of the main features
• Support of magnetic ink character recognition (MICR) printing
• Océ Gemini Instant Duplex Technology that enables the printing of both sides of a sheet at the
same time.
• Advanced scheduling concept on the operator panel to keep the machine running.
• Load and assign the media while the printer prints.
• Unload the media while the printer prints
• Assign the media while the printer warms up, after the printer is initialized.
• Support of up to 12 paper trays (total input capacity up to 13,800 sheets) and a roll feeder.
• Support of up to 3 stackers, a finisher and other external finishers.
• Support of a large range of media, media sizes and media weights.
• Support of secure printing.
• Support of IPDS/PS/PCL/PDF and streaming PS.
•
Support of a large range of software products, for example the Océ PRISMA series, Xerox
®
FreeFlow
®
.
• Support of RDO files via Océ DP Link.
Introduction to the Océ VarioPrint® 6000 MICR+ line
Chapter 1 - Introduction
9