Filter
Top Products
12 English
Preventive Measures_________________________
Personal Protective Equipment
Respiratory Protection: Not normally required. For large spills,
use dust respirator during cleanup.
Protective Gloves and/or Eye Protection: Not normally required.
For large spills, use rubber gloves and safety goggles during
cleanup.
Engineering Controls
Ventilation: Outside of normal ventilation, not normally required.
Other Protective Equipment and/or Hygienic Practices: None.
Spill Cleanup
Small Spills
1. Remove sources of ignition.
2. Carefully clean up the spill with a wet cloth, avoiding inhalation
of fine dust.
Large Spills
1. Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
2. Wear protective gear: respirator, rubber gloves, safety goggles.
3. Vacuum the spill, then wipe up remainder with a wet cloth.
Waste Disposal
• Prevent release of material into natural waters and sewers.
• Follow appropriate federal, state and local regulations.
• Small amounts can be incinerated.
Careful! Combustion can create harmful gases such as carbon
monoxide and nitrogen oxides.
• Large amounts must be passed to a licensed waste contractor.
Precautions
Precautions for Handling or Storage: Protect from the sun. Store
in a cool room, under 104°F (40°C). Keep out of reach of
children.
Other Precautions: None.
Shipping Information
Special Shipping Information: Non hazardous. Handle container
carefully to avoid shock. Do not drop. Keep dry.
User’s Responsibility _________________________
This bulletin cannot cover all possible situations which the user
may experience when using this product. Each aspect of your
operation must be examined in regard to if, or where, additional
precautions may be necessary. All health and safety information
contained in this bulletin must be provided to your employees or
customers. It is your responsibility to use this information to
develop appropriate work practice guidelines and employee
instructional programs for your operation.
Preparation Date of MSDS____________________
Date: February 10, 2004.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
http://www.okidata.com
my.okidata.com